Mounting Alternator
BigBlockDart.com is the premier Dodge Dart forum on the internet. Registered Users do not see the above ads.Please Register - It's Free!
Results 1 to 4 of 4

Thread: Mounting Alternator

  1. #1
    Newb
    Join Date
    May 2011
    Location
    Mechanicsville,Va.
    Posts
    2
    Post Thanks / Like

    Mounting Alternator

    1970 Dart 440,no power steering,no a/c.Alternator is presently mounted to water pump on LH side.Was looking at billet and stainless mounts,but they all show RH side mounting.Engine has front mounting plate behind water pump.Anybody got any ideas as what will work.Thanks!!!!!

  2. Remove Advertisements
    BigBlockDart.com
    Advertisements
     

  3. #2
    Senior Member cu440da's Avatar
    Join Date
    Dec 2005
    Location
    Cottage Grove, MN
    Posts
    768
    Post Thanks / Like
    This was my no buck approach with a mini alternator- don't know if a full size would work like this. Used cutoff wheel to notch some of the power steering pump ear out, then used the adjusting bracket on a different boss. It was absolutely rock solid.
    Attached Images
    '84 D150 Stepside 5.7 project
    '05 Magnum RT 5.7
    '07 Ram 2500HD 5.7
    '03 Kawasaki Z1000

  4. Thanks rivah52 thanked for this post
  5. #3
    Super Moderator bremereric's Avatar
    Join Date
    Dec 2009
    Location
    Tomball, TX USA
    Posts
    3,885
    Post Thanks / Like
    Man that's the first time I have seen one on the driver's side. They usuall mount it low and drill a hole in the motor plate on the passenger side for front ear to swivel it.
    Attached Images
    Last edited by bremereric; 03-25-2012 at 10:37 PM.
    Eric Bremer
    Tomball TX 77375

    1968 Dodge Dart 440 Big Block, Edelbrock Performer RPM Heads, Performer RPM intake, Holley 770 CFM Street Avenger, .541/.538 lift hydraulic roller cam, Harland Sharp 1.6 Ratio Roller Rockers..Crane Roller lifters..580 Final lift, MSD pro-billet distributor, MSD ignition, 355 Auburn Suregrip 8 3/4 rear end.



    1977 Dodge Aspen R/T...318...4 speed tranny with 355 gears in a 8 1/4" rear.

  6. Thanks rivah52 thanked for this post
  7. #4
    BBD GOD
    Join Date
    Jan 2006
    Location
    warrenton , nc 27589
    Posts
    3,978
    Post Thanks / Like

    Lightbulb

    .
    Attached Images
    "bOb Built" (no matter how many times it takes)

  8. Thanks rivah52 thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •