Pages: [1] 
|
 |
|
 Author
|
Topic: Rear Brake Line Junction Block (Read 428 times)
|
451 valiant
Full Member
 Offline
Posts: 218
Ontario, Canada
|
hi guys, I just finished installing the SS springs a needed a longer rear flex hose. I bought a longer hose - the part number that somebody recommended on here, but I need a new REAR junction block (the one the vent bolt goes through). The old one ('68) is part of the flex hose. I know some years they were part of the hose and some years are seperate (b,e bodies maybe, 71-73 maybe???). Does anyone know where I can get my hands on one or who sells them. I got a new vent bolt, but have had no luck with the block. Thank You
|
|
|
|
|
Logged
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4850
A-bodies since 1978, this one since 1983
|
To my knowledge there were no years where the block and hose were one piece. Maybe after years of road grime, water, etc. they are one now, though.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
451 valiant
Full Member
Offline
Posts: 218
Ontario, Canada
|
Thanks Jim - I didn't think they were one piece either , but I cleaned this one up and it is. Maybe it was replaced at one time and it's an aftermarket part- I don't know?  It came off a 73 Charger 8 3/4. So i went to my old 7 1/4 that I replaced with this 8 3/4, and checked it to compare, it's one piece too. Now I'm really up the creek unless I can find a seperate block. Here's the pic:  |
|
|
|
|
Logged
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4850
A-bodies since 1978, this one since 1983
|
Well, I'll be...........
Lots of blocks out there. I probably have one or two spares. Let me look.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
jet-taz
|
the hose is napa 36501 it's around $20.00, the tee-block block from a b-body is a y formation. also keep in mind what year it's as the vent location is drifferent and your brake lines will be wrong.  |
|
|
|
|
Logged
|
69 dodge dart/440 former god over 1200 post on old site
|
|
|
Ciscodog
Guest
|
Yep there's two different kinds. When I was ordering my long hose from Bill he asked what kind I had - it was new to me too!
|
|
|
|
|
Logged
|
|
|
|
|
jet-taz
|
i think you got one of these replacement hose/tee-blocks. i think you will have a problem with pre-bent lines
[attachment deleted by admin]
|
|
|
|
|
Logged
|
69 dodge dart/440 former god over 1200 post on old site
|
|
|
|
Bill_Reilly
|
I keep getting phone calls with people who have one-piece units, especially b-bodies of various years. This is the first time I saw one though...I have a case of the normal threaded T's on order right now - both shapes, that Earl's makes....not sure when I'll get them, but it should be soon. Earl's makes them, but no one carries them, so I had to put in a stock order to get a bunch directly.
|
|
|
|
|
Logged
|
Those who say it can't be done, should not interrupt those of us who are doing it.
|
|
|
|
sycboi
|
This is the type I purchased from Fine Lines. I know for a fact that Inline Tube has them as well (that is where this pic came from.  |
|
|
|
|
Logged
|
SuperBeast
'70 Dart
Roller 383 w/ much aluminum
Viper T-56, StreetTwin, hydraulic throwout, HD Dana 60, AlterKtion
An enforcer for the Mopar Mafia!
|
|
|
|
Bill_Reilly
|
That's them....
|
|
|
|
|
Logged
|
Those who say it can't be done, should not interrupt those of us who are doing it.
|
|
|
|
oldkimmer
|
I dont know if being up here in canada makes a difference or not, but every a,b,+ e body ive had has had the 1 piece line. Trucks+ c bodies had the 2 piece, and seems to me that they were longer also................oldkimmer
|
|
|
|
|
Logged
|
MR. Mechanic...........Panther Pink Duster The Beast has been Unleashed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
|
Pages: [1] 
|
|
|
 |
