super bee sheet metal 68

[silk]

found lower rear quarters at yr 1   probabbly will neesd at least one lower rear inner any body got a suggestion for 68 super bee  yr one dont show the inners

[b569rr]

See if you can find it here.

http://store.shermanparts.com/cgi-bin/sherman/product_list.html?img_num=187

Tom

[eldubb440]

i used sherman parts on my R/T............the lower patches behind the wheel come all the way up over the bumper recess, but the distance from the body line to the top of the bumper recess was about 3/4 inch too long. fortunately, i didnt need all that at the top. once i figured out i had excess metal, and got rid of it they fit fine. i recommend replacing the trunk extensions also. i did both sides and a trunk pan, worked out great....... dont forget to prime or paint the areas you wont be able to acess before you assemble.

[attachment deleted by admin]

[Rate]

dubb, I swear, I wish I had half of the bodywork/welding talent you have >_>