correct master cylinder ?

[yellowabody]

Hey everyone im replacing brakes on a 69dart gt with manual drum brakes i got a new master cylinder but i think its wrong the one on the car has a cap thats held down with a steel wire . also the push rod fron the brake pedal seems to not want to come out the new master has no pushrod and has a bolt on cover . does any have a clue on if that push rod comes out i pulled on it and ripped the guts out of the old master but the rods still stuck ?

[doug 371]

69 has the bolt to hold the cap on...theres a small o ring on the rod that holds it in the master. now that u have the guts ripped out, slice said guts open to reveal o ring on end of rod and it will pull out...if u dont cut too far, u should be able to reuse pushrod and o ring.

[yellowabody]

thanks for the help

[Capt Jack]

please tell me this one is gonna work (with the adaptor of course)     (or not)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=290123390491&rd=1&rd=1