lower ball joint for big bolt conversion

[roadrunnerreds]

what ball joint did you use for converting to big bolt pattern wheels.i used 73 -76 lower ball joints and the steering did not turn as far so i ground off some of the stops.Brads

[fstfish66]

i used the 76 dart upper control arms,,,they have the big ball joints,,and i used the orignal 66 lower control arms,,and i used the lower ball joints that go to the 76 disc spindle,,,,,turns fine,,,

[340fyd]

i used the 76 dart upper control arms,,,they have the big ball joints,,and i used the orignal 66 lower control arms,,and i used the lower ball joints that go to the 76 disc spindle,,,,,turns fine,,,

Same here.

Lee

[375InStroke]

 
My steering box stops before it reaches the stops on the suspension.

[fstfish66]

both directions   if not both directions,, you may not have the pit man arm centered on the spline,, there is a  notch on the spline and one the steering box,,..if problem is in both directions,,, i gues it would depend how much it stops turning short of the stops,,,,