Tubular arms

[73Dust]

hello this is my first time here on the fourm. i've been reading recently on how to setup my tubular arms on my 73 duster. i have yet to take things apart i'm trying to get every thing for a disk brake conversion. but it cant wait my lower ball joints need to be replaced. i got a set of arms a while back on ebay . "wish i wound have found bills first"  my thing is i'm not to sure how to fit them on.they look like bills but i dont think there the same. so i ask can any one please help me with the setup. one more thing will the work on drums for now?

i have a set of the lower arms with the tabs and a sway bar that i'll be putting on has well. the only thing i need for my disk are hoses and the rotors. will it matter if the spindels, calipers and adapters came of diffenent cars there were taken of  off  73 and a 75?

[73Dust]

is there any one that can help me? i really need to get this fixed. the duster is my only car and the tires are starting to show the steel belt i need to replace the lower ball joint and would like to put the Tubular arms in. i'm sorry there not Bills but i didnt know about his before it was to late

[70 Dustpan]

They just bolt on the same as the stock ones. Start by getting the stock ones off and setting the ends as close as you can the the stock ones, get everything bolted back up and have it all aligned. What type of cars did all the other parts come off of?

[73Dust]

so it's really that easy? i just need to hear it. i know i can do it just wanted to be sure cause i mess it up it's the bus for me cause my ball and chain wont let me take her car. whne every thing is all bolted in and i take it to the alignment shop they can set my caster and camber.  would a 5 degrees caster and a -1/2 camber work on the duster

i really cant remember whet cars the parts came from i do know they were 73 to 75 a bodys. i want to say calipers and adapters came of a 73 Valiant" thats were i got my split bench seat. still looking for buckets" the spindels  i beleave from a 75 duster.

[70 Dustpan]

As long as they are from the same type of car ( A Bodys ) they there is no problem. Get the rotors and hoses for a 75 Duster and you will be fine.

[73Dust]

how about the Braided Lines. that RMS is selling will those be a better choice? https://www.reillymotorsports.com/store/product.php?productid=16155&cat=257&page=1. then all i'm going to need is the rotors

[AAOUTLAW]

if you need actual advice on front suspensions for race only applications...pm me...i AM the final word on race only applications