T-56 6-speed discussion...my posts updated

[blackbetty]

I dont have it running yet but it is bolted together and sitting in the chassis. It wont be running for a couple of months the chassis needs finished.

[MoparCar]

I finally got a chance to call Quicktime bellhousing and talked with Ross there. They are a very helpful company. I will definitely buy from them. Don't quote all the details on this---call to confirm. I was writing fast.....I may have missed a bit.

They make several bells for different T-56 and engines.

Their T-56 GM version does use the LS1 style transmission. This can use a hydraulic throw out bearing.
Their T-56 Viper version uses of course the Viper T-56 and is set up for the stock Viper fork and mechanical slave actuator. (can anyone verify that the viper uses a fork and slave?) I don't know Vipers.
The new TR6060 high performance unit from OEM applications utilize a integrated bellhousing if I understood correctly, but Tremec has one out or is coming out with the same 6060 transmission with a "divorced" bell to use the standard T-56 bolt pattern which will bolt to their bells. Tremec is calling this the T-56 Magnum. I see Tremec mentions it on their website if you search. No details though. Quicktime said this will bolt up to one of their bells.

My question about the 6.1 hemi and the T-56 is answered by the same above, just that the LA engine bell is used with a LA starter and remains on the driver's side at the 7 o'clock position. They are coming out with a dedicated new gen hemi 5.7/6.1 bell in a couple of months that will allow the starter on the passenger's side also at the 5 o'clock position.

Quicktime does not sell or provide pilot bearings. You need to go to NAPA or somewhere and figure it out or have one machined.
They basically said they can mate up almost any T-56 to any Mopar engine. It might require a different  input or front plate at most.

This is becoming a great thread!

Wes

[sycboi]

Their T-56 Viper version uses of course the Viper T-56 and is set up for the stock Viper fork and mechanical slave actuator. (can anyone verify that the viper uses a fork and slave?) I don't know Vipers.

Vipers used hydraulic slave cylinders, that mount to the front of the transmision, then slip on T/O bearings go onto the slave. 

I'm setting my T-56 up with a Viper set-up as we type...

-Michael

[MoparCar]

sycboi,

Thanks for the Viper info. I too plan on going with the hydraulic TO also. Easier and cleaner for my application. What brand of set up did you use?
Next question:
Anyone have any additional info on the new T-56 Magnum (the TR6060with the standard T-56 bold pattern)? Release about June, but that's all I know.

Wes

[sycboi]

What brand of set up did you use?

I originally had a McLeod but the working range will not fly unless I rebuild it with a new/different sized piston...read my first post...I updated it...

-Michael

[MyCreation68]

maybe this question has been answered before but I just havn't seen it. I'm wondering where the shifter would come out with the array of T56 transmissions that came in all these different vehicles. If possible I want to reuse my stock console after install so nobody is the wiser of what I've got under the shifter.

I also have a question on bellhousing. I am building a car that will eventually see a turbo charged slant, I figured because I'd likely get a custom built SFI approved bellhousing that I might as well get it built for a better trans anyways. so I just wanted to make sure with the guys who have already bought one that the bellhousing I see on the trans already is removable?

[Bill_Reilly]

So where does one buy the bigblock-T56 pilot bearing? Anyone find it available anywhere?

[MoparCar]

I don't have an answer for that either.......
I have the same question regarding sourcing a pilot bearing for a t-56/6.1L Hemi combo. Anyone? Quicktime said I may have to have one machined?

[rjsjea]

Keisler would know probably.......they make a 6.1 conversion

[Bill_Reilly]

Got in touch with my old buddy Geoff - he's fixing me up.

Not much info, but the text is in fact accurate

http://gerkoenterprises.com/

[rjsjea]

I thought Gerko was De-funk?? 

[Bill_Reilly]

I'm told Geoff and his brother parted ways unfortunately, but Geoff continues to work on things. I havent spoken to his brother, so I'm sure what he's doing.
I just always dealt with Geoff, so I call him by default.

[blackbetty]

maybe this question has been answered before but I just havn't seen it. I'm wondering where the shifter would come out with the array of T56 transmissions that came in all these different vehicles. If possible I want to reuse my stock console after install so nobody is the wiser of what I've got under the shifter.

The trans will not fit in the stock tunnel and the shifters come out in the middle in the tail of the trans. You can probably modify the shifter to move it over but the tunnel will need modified.

[MyCreation68]

maybe this question has been answered before but I just havn't seen it. I'm wondering where the shifter would come out with the array of T56 transmissions that came in all these different vehicles. If possible I want to reuse my stock console after install so nobody is the wiser of what I've got under the shifter.

The trans will not fit in the stock tunnel and the shifters come out in the middle in the tail of the trans. You can probably modify the shifter to move it over but the tunnel will need modified.

I know the tunnel will require modification. but I'd like to use my stock floor shift console so the car looks "stock"