Pages: [1] 
|
 |
|
 Author
|
Topic: Brake backing plates (Read 1378 times)
|
BMyers03
Guest
|
Does anyone know how to tell if a 10 inch brake backing plate is for an A body or a B body when you don`t know what car they came from. I want to use then on an 8 3/4 housing. The brakes that are on them measure 2 1/2 wide but I`m not sure if they are the original brakes or not. I want to have axles made with the 4 1/2 bolt pattern and need to know what drums to buy. Thanks for any help.
|
|
|
|
|
Logged
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
 Offline
Posts: 4927
A-bodies since 1978, this one since 1983
|
This is why I recommend people buy backing plates and drums together from the same car. The backing plates for the a-body 10x1.75 and b-body 10x2 are about the same (or so I've been told), but for a 2.5" wide shoe the backing plate is not the same. The axles come in two offsets, a-body and everything else. Don't buy big bolt axles with a-body offset as you won't find drums that will fit properly.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
BMyers03
Guest
|
So if I understand this right, I should get A body axles made with 4 1/2 bolt pattern except get the B body measurement from the bearing to the outside axle flange, buy B body drums and then if there is a problem find B boby backing plates.
|
|
|
|
|
Logged
|
|
|
|
|
Bakaruda
|
When you buy axels they should ask what brakes you have. At least Moser did.
|
|
|
|
|
Logged
|
Cary Snyder 5.7L Hemi Cuda  |
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4927
A-bodies since 1978, this one since 1983
|
BMyers03,
Yes, that's what you need to order.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
Pages: [1] 
|
|
|
 | 
