Let's see your interiors!

[Gumbydammit]

I'm debating as to what to do with my interior on the  68 dart seat wise.  I have a mint black bench interior, and I love it cuz it's comfy.   I also have a pair of the A100 seats like they used in the Hemi Darts but I'm not sure if I would like them.  I'm not too keen on the plastic racing buckets ( got one of those too - use it to sit in and play vid games) .  Let's see some interior pics so I can get some Ideas!

[matts69Dart]

Gumby, Sorry I don't have any interior pics, cuz mine is in about a million pieces. But, my opinion is run the bench seat. They look good with roll bars and it has sleeper written all over it. I would run one in a minute if I had one. It would also let the wifey cuddle up next to me on cruise nite. Just my 2 cents worth. Matt

[Bigcube]

Here's some of mine. The floor is covered with Carpet, I glued vinyl over the the removable tunnel.  The column has been extended between the wheel and the dash by 2" as well as shortened under the dash so it ends before the firewall.  The dash/gauges are stock and the headliner is stock.

Headliner and yes the dome light works

Ugly velour door panel that will be replaced with stock black vinyl and the stock arm rests

Carpet and vinyl covered tinwork

Shifter pedestal/consel

Dash/Gauges

[flight704]

big cube

  nice ride.  interior is strictly business.

[Bigcube]

big cube

  nice ride.  interior is strictly business.

Thanks man!    I like to think it looks more like a pro street car than an 8 sec ride. 

Steve, I should've mentioned, the Kirkey seats are very comfy  I have 17" heavy duty Pro Street seat on the driver side and 15" econo drag seat on the pass side. That's the filter for giving rides, you have to fit in the seat 

[Gumbydammit]

Filter - I hear that!  I gave one of my 350lb semi -pro lineman friends a ride in my dart last year, and the broke my seat!  As soon as I hit the throttle, the seat back went flat back!  To this day he won't get back in for another ride.    .  We have Kirkeys in the Duster, I'm just not sure if they give off a poser look on the street even if the Dart will be capable of mid tens this year.

[jamesdart]

thats a tough one. they are all cool. i like the a-100's also like the bench.

[Bakaruda]

I am doing Leather and swaed. My seat bracket's will be chromed. Roll bar powdercoated.

[Gumbydammit]

I'll try to attach a pic of my interior with the bench.


[attachment deleted by admin]

[72Dart_400]

I like the stock bench seat look!  Sleeper!

[Midnight Special]

Derricks Sport--Sorry Kinda crappy Phone pics, better ones tomorrow

[attachment deleted by admin]

[6469mopar]

HERES MY 69 DART

[attachment deleted by admin]

[440Ken]

My Swinger is just a cruiser, no racing, and I like the buckets. I used buckets seat out of a 1986 Chrysler Laser, all leather, reclining and with the pump up thigh and lumbar support. Console from a 1970 Cuda with the Slap-stick shifter. It's a combo you just don't see any where else.
Ken

[smythge]

I'll post some pics of mine when it is complete in a  couple weeks, but I took some measurements went to the local salvage yard and got the front buckets, console & full flip down back seat out of an 05 Grand prix, with some welding of seat brackets and slight metal work it all fit right in,(ok it took 2 full days to make the necessary modifications), but now it fits right in.  Not your usual 1965 Dart. 

[69 GTS Clonvertible]

Here's mine

[Bakaruda]

Love the dart

[azz7772]

I like the stock bench seat look!  Sleeper!

you just like your women sitting next to you     

[SoonerMatt]

I get some strange looks having carbon in a 70's mopar, but i think it makes a good juxtaposition.  that black stripe going down the door is carbon and the pedals are aluminum with carbon, um, tread?  the intirior is not done yet, obviously, but there is a 15" monitor that flips down from the celing in front of the mirror.  computer controls the EFI and has wifi.



[attachment deleted by admin]

[dmn71]

SoonerMatt did you do your dash gauge setup your self or have it done?  Looks nice.  Steve

[SoonerMatt]

I did it.  I just cut out the back of the existing dash and used epoxy to bond in a flat piece of carbon, drilled holes for guages and switches.  I've been working on this car for 6 years and i have a habit of saying "you know what would be cool..." then doing it the next day.

[Poison_Dart]

All very Nice done interiors I'm sure theres many more that have nice ones and can contribute, But don't know why there holding back, let see them Guys, lets see some of that sweet custom worked interiors,


[attachment deleted by admin]

[Dartsport]

Poison Dart - That looks good! Here is mine, my son is in the driver seat!! You can see part of the interior!

[attachment deleted by admin]

[thebankerstoy]

Here's a couple of shots of my sons 72 Dart Swinger's interior that I restored in early 2005.

Richard

Back

[attachment deleted by admin]

[thebankerstoy]

Front

Richard

[attachment deleted by admin]

[thebankerstoy]

Front including door panels and dash

Richard

[attachment deleted by admin]

[69 GTS Clonvertible]

Love the dart

Thanks! I love it to.

[Halfaed]

Little blurry..............

[DartKnight]

Knowing me, I'd STILL forget to turn that fan on....

I like those Ultralites in the dash; that's what I'm running right now.

[Halfaed]

I hear yah !!!!!

[az426hemi]

Here are a couple.  Original stuff.  63 dart.

Mike

[attachment deleted by admin]

[Norway Dart]

Heres some pictures of my old Dart.  Damn i miss it...

[383man]

My sons Dart's interior is bone stock.  But it will get a roll bar soon as we plan to go below 11.50's this year.  Ron