Pages: [1] 
|
 |
|
 Author
|
Topic: upper ball joint (Read 159 times)
|
x360x64dart
Jr. Member
 Offline
Posts: 98
BigBlockDart.Com
|
Do you need to press in the ball joint in the upper or should tightning the nut suck it through enough?
|
|
|
|
|
Logged
|
It's almost a big block! Escondido,CA
|
|
|
Xwaynestaticx03
Jr. Member
Offline
Posts: 50
BigBlockDart.Com
|
the ball joint actually screws into the control arm. it doesnt press in. hopefully the threads arent stripped out. if they arent you should be able to put the ball joints in easily. good luck
|
|
|
|
|
Logged
|
|
|
|
|
67 dartgts
|
Hello: Yep  . Maynard |
|
|
|
|
Logged
|
1967 Dart GTS(orginial owner) / 1967 Dart 2 door post 440 / 2001 PTCruiser / 2004 Dodge Ram Quad Laramie Hemi (small grage  [/img] |
|
|
x360x64dart
Jr. Member
Offline
Posts: 98
BigBlockDart.Com
|
Oh woops. ![\/][](http://www.bigblockdart.com/Smileys/classic/finger020.gif) dummy! Thanks guys |
|
|
|
|
Logged
|
It's almost a big block! Escondido,CA
|
|
|
x360x64dart
Jr. Member
Offline
Posts: 98
BigBlockDart.Com
|
I'm pretty sur e they were mostly stripped out, there was just enough left to grab so i went ahead and muscled it in with a pipe wrench. It definitely didnt go in easy but its in their solid. How far do i turn it in, stop at the last thread or go past till it bottoms on the flat? Thanks Dustin I know i know, i got a shop manuel on the way  |
|
|
|
|
Logged
|
It's almost a big block! Escondido,CA
|
|
|
x360x64dart
Jr. Member
Offline
Posts: 98
BigBlockDart.Com
|
|
|
|
|
Logged
|
It's almost a big block! Escondido,CA
|
|
|
x360x64dart
Jr. Member
Offline
Posts: 98
BigBlockDart.Com
|
i bottomed them out on the flange, got impacient, hope that was rite!  |
|
|
|
|
Logged
|
It's almost a big block! Escondido,CA
|
|
|
|
doug 371
|
u need to torque to at least 125 foot lbs.
|
|
|
|
|
Logged
|
|
|
|
|
68_Val_Sedan
|
yup if you bottomed out the flange on the A arm yuo will be fine ....
|
|
|
|
|
Logged
|
67 dart 270 presently a /6 but destined to be a  ,68 Chrysler 300 Convertible 440 auto |
|
|
|
Pages: [1] 
|
|
|
 |
bbd1upper bj2.JPG
