Pages: [1] 
|
 |
|
 Author
|
Topic: Need some axle help. (Read 172 times)
|
|
5258
|
Planning to shorten down a E body 8 3/4 in order to run the correct off set wheel I'm looking for ( Torq Thrust D 15x8.5, 3.75 Backspace)
69 dart has had springs moved in but not mini tubbed. Plan on running a G60 tire.
Any ideas what kind of axle length I should be shooting for , flange to flange?
Thanks
Mike
|
|
|
|
|
Logged
|
5258 Performance Shelbyville, Tennessee "Where the MOPAR factory built and race ready hotrods live again"
|
|
|
|
joesnow
|
Well thing thing to do is mount the tires you plan on running and put them under the car to see were they fit. Then measure,measure,measure.I have mine at the shop now getting cut.
'65 barracuda, no tubbing, 3/4" offset hangers, shimmed back 3/4", 255/60-15 15x7 4.5 backspacing. Taking 1" off each side betwwen the perch and backing plate and 1.5" of the spring width.
|
|
|
|
|
Logged
|
|
|
|
440-4sp
Jr. Member
 Offline
Posts: 22
BigBlockDart.Com
|
...put them under the car to see were they fit. That's really the only good advice whenever you start doing custom stuff like that. Measure twice, cut once. Works every time. |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 | 
