i need a power plant

[67notchback]

im looking for a mopar small block 340, 360, or the like. not real interested in a 318. im located in central ohio. ready to drop in and fire up prefered but if i gotta rebuild i have no problem doing that either. whos got what and is willing to get rid of it.

[physixx]

I've got a completely rebuilt 1970 340 engine for sale. I"ve got a good electronic distributor to go with it so it just needs an intake which is not a big deal depending on what you're looking for. It's .040 over with the KB hypereutectic pistons in it. If you're interested, let me know and I can shoot you some pics of it as it was being built to show what's inside along with a complete detailed list of the parts that were used. I can help with the shipping also. No big deal.

Ken
Edison, NJ

[Josh]

 I have a 79 360 that was a fresh short block about 30k ago. I over revved it. Now has valvetrain noise and smokes a little out left side. Complete weiand intake to oil pan W/ 904.

[67notchback]

some more info on the 340 would be awsome ken. pics and info even better. you can contact me here or email me at Sportsfn33@aol.com

[fasttcars]

...i got a 69 415hp 340..{pump gas, cast head,hyd cam}.....1971 506hp 383{pump gas, cast head,mech cam}....a 1969  480 hp 440.{pump gas, cast head,hyd cam}...a 1970  536hp 440.{pump gas, cast head, mech cam}....a all alluminum   643 hp 426 hemi.{pump gas, aluminum head, mech cam}....they all also carry a warranty..just to name a few..

[qkRick]

I'm located near Akron, Ohio and have two brand new engines that may be of interest to you.  1 SB & 1 BB. Both have test stand test and break in time only. First is 360+ .030 KB Hyper. pistons, balanced, ported J heads, Eddy Air Gap, Hughes hyd. cam, Eddy carb, Recurved elec. dist., HP fuel pump, Just installed in my 65 Dart which I will be picking up Tues. You will be able to hear run and ride in car if desired. Will sell complete as soon as the MP crate engine that I planned to install is sorted out (long story).   Second engine is 69 Steel crank 440 + .040.  KB Hypers. balanced, template ported 452 heads, Milodon deep pan, MoPar elec. dist, Eddy Intake, MP hyd. cam with Crane springs and lifters. HD oil pump and fuel pump. Both engines done right using only quality parts as they were not built to sell and were going into my personal cars.  Sold car that 440 was going into. May be able to arrange test stand demo of either one.

[physixx]

I sent you an email with the information and pictures.

Ken

[Four40Dart]

I have a 70 340 located in Illinois $800
four40cuda@yahoo.com

[70dust]

I have a 360 in 70 duster under 500 miles on engine.located in central ohio.Can hear run.contact me at tommysheaks@hotmail.com

[70dust]

Must not need a power plant huh?

[67notchback]

no actually i do but iv got a lead on a 5.7 for the right price so iv been doing my research on whats all going to be involved. my thought is if im gonna put the work into putting another motor its gonna be what i want this time. im already changing the crossmember from a /6 to a small block and have been taking my time reading the wealth of knowledge on here about the new hemi swap. for the price of building or purchasing a small block i could just about have a carb version of the 5.7 on the road.

[mrhotrod]

I have a fresh 505 c.i. 800+HP for sale. If interested PM me for more details

[MVRCorp]

I have a friend that works at Maaco and has a "totaled" 2007 Charger R/T 5.7 Hemi /w auto trans. and all computers for sale for $4000.00. It has 25K miles on it. A sweet swap located in Denver. I'll be at the car show there tomorrow and will get pics if you want.
Jim