340 or 360

[Placemotorsports]

Looking to replace the 318 in my Duster, let me know what you have, how much you want, and where your from....Thanks!!

[aa-1159]

have a 340 and 360, both need rebuilds, 360 complete, no carb. $200.00, you pick up
340- $500.00 you pick up
email for more info aa1159@verizon.net
chester, va. 23831

[GTXperience]

Where are you located and how far (geographically) are you willing to look for a motor? 

[duster-dan]

Looking to replace the 318 in my Duster, let me know what you have, how much you want, and where your from....Thanks!!

I have complete long block  71  340  .030 over, needs rebuild. w/J heads $500.00. Also set 340 X heads fresh.
have pics for all.

check this link  http://440tradingpost.hqforums.com/small-block-340-and-x-heads-vt419.html

Michigan

thanks Dan

[Placemotorsports]

I'd like to be able to pick it up, so I'd say within a 100 miles or so unless it's something that I'm really interested in then shipping is possible.

[aa-1159]

you never said where you are

[Placemotorsports]

I'm in Martinsburg, WV

[physixx]

I'm about 4 hours from you. I have a 1970 340. All fresh and ready to go. Needs intake, carb, and valve covers. I responded to your FABO ad with a picture. I can meet you part way to save on shipping if you're interested. Let me know if you need more info and pictures as the engine was being built.

Ken
Edison, NJ
rider1454@aol.com

[Placemotorsports]

I remember your reply on FABO, but it's a little out of my budget right now. 

[jeffneal66]

I live in Oregon and have a running 340 I am willing to sell if you are interested in shipping?  Should be able to get it to you complete for around $1500 to $1800 (but need actual shipping costs).

I can give you more details if you are interested.

Jeff

[beeprace]

You probably be beter off looking for 360 stuff. I have 7 340 blocks and I wouldn't take 500.00 each for them, probably wouldn't sell them at all. 340 blocks in good condition are getting very rare. The R series blocks are heavy and come with a bunch of problems, the resto blocks are super except you can't put a roller in them. All this makes 340 blocks worth a mint.

Of course when someone manufactures a good R block with standard lifter angle that will take a roller and is under 1800.00, then the old blocks wont be the ticket.

Good luck, just my 2 cents.