Pages: [1] 
|
 |
|
 Author
|
Topic: Steering linkage help (Read 136 times)
|
|
MoPar_or _NoCar
|
Put center link in before or after installing B motor in 68 Dart? Has SB K frame, 8 qt pan, power steering, shumacher biscuit conversion and headers. Would like it to roll again. Thanx
|
|
|
|
|
Logged
|
63' Dart GT 225/904/7.25 but totaly original =Black w/Red int.
68' Dart 383 / 727 / 8.75w3.55 suregrip
70' Challenger 440 / 727 / 8.75w3.23 suregrip 80% complete
93' Shadow ES Daily Driver
97' 1500 318 4X4 Chipped and breathes good
08' Avenger R/T Family Sedan
|
|
|
|
signet
|
hey.
the centerlink can be bolted up after no problem if the pan is right.
what you may want to do is remove and reweld the lip in that K-member for improved clearance were it gets close to the front of the pan.
did you modify the area were the oil pump comes close to the engine mount bracket?
anyways i have had no problems with the center-link hooked up, but the oil pump and front of the pan and the pinch weld in the trans tunnel all were on the "round-2-it" list.
take care
|
|
|
|
|
Logged
|
|
|
|
|
MoPar_or _NoCar
|
Those mods are all done. Just wanted to make sure I didn't have to take it apart again. Thanx Alot !!!
|
|
|
|
|
Logged
|
63' Dart GT 225/904/7.25 but totaly original =Black w/Red int.
68' Dart 383 / 727 / 8.75w3.55 suregrip
70' Challenger 440 / 727 / 8.75w3.23 suregrip 80% complete
93' Shadow ES Daily Driver
97' 1500 318 4X4 Chipped and breathes good
08' Avenger R/T Family Sedan
|
|
|
|
Pages: [1] 
|
|
|
 | 
