Welcome,
Guest
. Please
login
or
register
.
August 29, 2008, 10:32:53 PM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
The BigBlockDart Message Board
Technical
Engine, Drivetrain
How much milling per cc on stealth/eddy heads
Pages:
[
1
]
Author
Topic: How much milling per cc on stealth/eddy heads (Read 113 times)
ksdartguy
BBD God
Offline
Posts: 1660
Is it really Just a 383? Well, Maybe!
How much milling per cc on stealth/eddy heads
«
on:
June 27, 2008, 04:46:06 PM »
Anyone milled their stealths?
Just curious what material, it takes per cc.
Rick
Logged
69 Swinger, 400/499, ported Stealth heads, Crower 262/266d, .686/.696L roller,11 to 1, 950 Bigs, E85 carb
speeder440
Full Member
Offline
Posts: 193
BigBlockDart.Com
Re: How much milling per cc on stealth/eddy heads
«
Reply #1 on:
June 27, 2008, 05:15:03 PM »
Hey Rick,on the box that my Eddys were in said 82cc,I milled .040" and CCed at 75cc after milling.
Logged
chargerbr549
Jr. Member
Offline
Posts: 49
BigBlockDart.Com
Re: How much milling per cc on stealth/eddy heads
«
Reply #2 on:
June 28, 2008, 01:10:20 AM »
Generally it's about .006" per cc for a closed combustion chamber on a big block chrysler and about .004" per cc for an open chamber big block head, which is about right on with what speeder 440 said.
Kevin
Logged
slippery440
Jr. Member
Offline
Posts: 20
BigBlockDart.Com
Re: How much milling per cc on stealth/eddy heads
«
Reply #3 on:
June 28, 2008, 09:00:20 AM »
I took .075 off my Stealths and started at 85 cc and ended with 71 cc.
Logged
Pages:
[
1
]
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> Off-Topic
=> Wanted
-----------------------------
Technical
-----------------------------
=> Engine, Drivetrain
=> Chassis, Suspension
=> Body, Paint, Interior, Wiring
=> Early A-bodies
Author
Logged
Hey Rick,on the box that my Eddys were in said 82cc,I milled .040" and CCed at 75cc after milling.