Welcome, Guest. Please login or register.
December 02, 2008, 08:40:21 AM

Login with username, password and session length

Visit ReillyMotorSports
* Home Help Search Memberlist gallery Login Register
+  The BigBlockDart Message Board
|-+  Technical
| |-+  Chassis, Suspension
| | |-+  frame connector Qs
Pages: [1] Go Down Print
Author Topic: frame connector Qs  (Read 283 times)
dd69a
Full Member
***
Offline Offline

Posts: 441


BigBlockDart.Com


Email
frame connector Qs
« on: June 28, 2008, 07:52:32 PM »

i want the frame connectors that go through the floor to the cage. Were do i get this type for a 69 dart?  any pics of ur setups would help. thanx!
Logged
scaldeddog
Sr. Member
****
Offline Offline

Posts: 603


Lake Helen, Florida


Email
Re: frame connector Qs
« Reply #1 on: June 28, 2008, 08:10:20 PM »

I built my first set out of 2X3 tubing and they will go thru the floor. You can do 2X2 box tubing and have the cage go thru the floor to the frame connectors.
Logged

Smokem' if ya gottem'
822 post on the old board
abqdart
BBD God
*****
Offline Offline

Posts: 1197


72 Swinger 394/727/8.75


Email
Re: frame connector Qs
« Reply #2 on: June 28, 2008, 11:20:32 PM »

As far as I know, your going to have to make them. Its not that hard if you can measure, cut and weld steel.
Logged

Rio Rancho N.M 87144
Scamp
Jr. Member
**
Offline Offline

Posts: 64

BigBlockDart.Com


Email
Re: frame connector Qs
« Reply #3 on: June 29, 2008, 12:15:13 AM »

Made mine out of 2"x3"x.125" steel tube.  2"x6" plate for connection to front frame and notched to fit over rear frame (it was a perfect fit).  Cut notches in the floor.  The hardest part was making that 1st slit!!

Scamp


* SF-Conn (1) (Medium) (Small).JPG (57.02 KB, 640x480 - viewed 154 times.)

* SF-Conn (2) (Medium) (Small).JPG (55.38 KB, 640x480 - viewed 155 times.)

* SF-Conn (3) (Medium) (Small).JPG (54.41 KB, 640x480 - viewed 154 times.)

* SF-Conn (4) (Medium) (Small).JPG (53.84 KB, 640x480 - viewed 155 times.)
Logged
Scamp
Jr. Member
**
Offline Offline

Posts: 64

BigBlockDart.Com


Email
Re: frame connector Qs
« Reply #4 on: June 29, 2008, 12:16:38 AM »

The rest of the pics

Scamp


* SF-Conn (5) (Medium) (Small).JPG (50 KB, 640x480 - viewed 154 times.)

* SF-Conn (6) (Medium) (Small).JPG (47.99 KB, 640x480 - viewed 153 times.)

* SF-Conn (7) (Medium) (Small).JPG (48.52 KB, 640x480 - viewed 152 times.)

* SF-Conn (11) (Medium) (Small).JPG (52.94 KB, 640x480 - viewed 156 times.)
Logged
dd69a
Full Member
***
Offline Offline

Posts: 441


BigBlockDart.Com


Email
Re: frame connector Qs
« Reply #5 on: June 29, 2008, 12:24:03 AM »

great pics very helpful thanx!!!!
Logged
Scamp
Jr. Member
**
Offline Offline

Posts: 64

BigBlockDart.Com


Email
Re: frame connector Qs
« Reply #6 on: June 29, 2008, 12:25:54 AM »

No problem, good luck.
Logged
coors00
Full Member
***
Offline Offline

Posts: 456

BigBlockDart.Com


Email
Re: frame connector Qs
« Reply #7 on: June 29, 2008, 07:42:16 PM »

Morrison, Alston, chassis engineering.
Logged
Pages: [1] Go Up Print 
Jump to:  

Powered by MySQL Powered by PHP The BigBlockDart Message Board | Powered by SMF 1.0.5.
© 2001-2005, Lewis Media. All Rights Reserved.
Valid XHTML 1.0! Valid CSS!