Pages: [1] 
|
 |
|
 Author
|
Topic: 71 duster with 440-1 heads (Read 327 times)
|
mwalls
Newbie
 Offline
Posts: 6
BigBlockDart.Com
|
Thought i would try to post some pics of the duster I have been working on. Its going to be 440 stroked to 493 with indy 440-1 heads. Have not seen many with a 440 with these heads fit in a duster. I still just got the block and heads sitting there trying to fit every thing in and around it. The headers I got I still had to cut three of the tubes and rerout them to get them to work but turned out real nice. This was my first roll cage that I ever put in and welded up along with the dana 60 I narrowed and put together. Hope to have it running in a few months. What ya think? Well could not figure out how to post pics can someone tell me how.
|
|
|
|
|
Logged
|
|
|
|
|
fasttcars
|
..sounds like a fun ride.....  ................  .....................after 10 posts you can add pics |
|
|
|
|
Logged
|
|
|
|
|
bOb shingler
|
are they fender well headers?
|
|
|
|
|
Logged
|
"bOb Built" (no matter how many times it takes)  |
|
|
mwalls
Newbie
Offline
Posts: 6
BigBlockDart.Com
|
They are the pro parts.
|
|
|
|
|
Logged
|
|
|
|
|
ari440
|
didnt need to cut my proparts headers with indy sr,s  |
|
|
|
|
Logged
|
|
|
|
|
|
|
bOb shingler
|
what size tubes?
|
|
|
|
|
Logged
|
"bOb Built" (no matter how many times it takes) |
|
|
|
ksdartguy
|
Pro parts are 2" Tube headers
Rick
|
|
|
|
|
Logged
|
69 Swinger,3.54 Dana, 400/499, Stealth heads, Crower 262/266d, .686/.696L roller,11 to 1, 950 Bigs, E85 carb.
Best so far, 10.82 @ 124mph through the mufflers.
|
|
|
mwalls
Newbie
Offline
Posts: 6
BigBlockDart.Com
|
I could not get my headers to clear the torsion bars without cutting then but they worked out real good after that.
|
|
|
|
|
Logged
|
|
|
|
|
bOb shingler
|
Pro parts are 2" Tube headers
Rick
perfect  |
|
|
|
|
Logged
|
"bOb Built" (no matter how many times it takes) |
|
|
|
Pages: [1] 
|
|
|
 |
