Pages: [1] 
|
 |
|
 Author
|
Topic: 340 Exhaust manifolds (Read 750 times)
|
65Vart
Jr. Member
 Offline
Posts: 18
BigBlockDart.Com
|
Does anyone know if 70' 340 Exhaust manifolds will fit my 65 Abody Dart with no fender mods/clearance issues? at 250 for the pair I may by these instead of headers. Don't want to cut the car.
|
|
|
|
|
Logged
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4923
A-bodies since 1978, this one since 1983
|
I have heard both side to this, but when Lee (lilcuda) tried it back in the late 80s on the 66 he said they didn't fit. I don't remember where the problems were, though.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
doug 371
|
i had them mocked up in my 66 with manual steering and they seemed to clear everything
|
|
|
|
|
Logged
|
|
|
|
lilcuda
Jr. Member
Offline
Posts: 26
BigBlockDart.Com
|
I have heard both side to this, but when Lee (lilcuda) tried it back in the late 80s on the 66 he said they didn't fit. I don't remember where the problems were, though.
Well, they didn't have Schumacher mounts back then. I made my own with the help of a friend. We didn't get it quite right. Anyway, they DO fit with Schumacher mounts, however you have to replace the factory steering coupler with a Flaming River u-joint. My friend has 340 manifolds on his 1964 Barracuda. Lee 1966 Barracuda, 340 4 speed |
|
|
|
|
Logged
|
1966 Barracuda, 340, 4 speed
|
|
|
|
joesnow
|
The spitfire don't need fenders mods. I got a set within 1 month.
|
|
|
|
|
Logged
|
|
|
|
djwhog
Jr. Member
Offline
Posts: 51
BigBlockDart.Com
|
With Power Steering no go on drivers side, Manual steering it should but is very tight... I ended up with TTI on the 64 Dart, what a mother, look nice but man it is tuff! And I run a 727 and that made it even worse too with power steering. ![\/][](http://www.bigblockdart.com/Smileys/classic/finger020.gif) |
|
|
|
|
Logged
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4923
A-bodies since 1978, this one since 1983
|
Thanks for jumping in Lee.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
WAGGIN
Jr. Member
Offline
Posts: 62
BigBlockDart.Com
|
I had them on my 64 dart convertable with manual steering,you will need a 90 degree oil filter adaptor to go with them,should work with power steering,I will check,my 63 val has a v 8 and power steering...engine and trans are just sitting in there right now and I have a set of those manifolds so I will give a look for ya. Does anyone know if 70' 340 Exhaust manifolds will fit my 65 Abody Dart with no fender mods/clearance issues? at 250 for the pair I may by these instead of headers. Don't want to cut the car.
|
|
|
|
|
Logged
|
|
|
|
65Vart
Jr. Member
Offline
Posts: 18
BigBlockDart.Com
|
Trying to decide now between Spitfires and fenderwells. Anybody bolted up a TTI exhaust system to either?Spitfires flow ok?
|
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 |
