Various 440 parts needed

[blasphemous]

Water pump housing
Timing set (if it's unused)
Flexplate (for motorhome 440)
Crank and WP pulleys
BB 727 transmission
3600-ish stall torque converter

That's it for now...

[thebankerstoy]

Some of the items that you're looking for are heavy, so you might want to post your location so folks can decide if they can help you or not. 

Richard

[Gospel Runner]

I have a 727 Trans. I am in Connecticut. I picked it up for another build that i am no longer building. I got it for $300.00 Make me an offe and it's yours!!!

[blasphemous]

I always forget it doesn't show up under our names.  I'm in Louisville, KY... so I'd prefer the heavier stuff be close enough to pick up (a couple hours away or so), but the other stuff can ship.

The trans is too far away, I'm trying to find that a little close to home.  Thanks for the offer though.

[MoPar_or _NoCar]

I've got a cast housing with driver return. Still has good WP, you pay the 15#'s of shipping from 97230 and I'll throw it in UPS.

[M347]

I have a new roller timing set from Mancini and a water pump housing. Located 40 minutes north of Cincinnati.

[blasphemous]

I have a new roller timing set from Mancini and a water pump housing. Located 40 minutes north of Cincinnati.

How much do you want for the timing set?

[DartDad]

I have a 727, timing chain cover, pulleys, for a 440.  I got them in a trade and don't have any use for them.  I'm in Huntington, Indiana.

[blasphemous]

I have a 727, timing chain cover, pulleys, for a 440.  I got them in a trade and don't have any use for them.  I'm in Huntington, Indiana.

I have a TC cover, but the trans and pulleys I could use!  PM me and let's talk about making a deal.

[turbochallenger]

I am in mt.vernon IL , interstate 64 from where you are at takes you right here. I believe its a 2hour drive one way. I have a few rebuilt trannys, 350.00 for one. I have a tci 3600 rpm rated stall converter cost 516 new sell for 400.00., I also have a 2400 tci rated converter sell it for 250.00. Both have the bigger flexplate bolts 7/16 . I also have a b&m flex plate dual pattern I sell for 45.00. I could possibly meet you part way if needed.

[blasphemous]

I am in mt.vernon IL , interstate 64 from where you are at takes you right here. I believe its a 2hour drive one way. I have a few rebuilt trannys, 350.00 for one. I have a tci 3600 rpm rated stall converter cost 516 new sell for 400.00., I also have a 2400 tci rated converter sell it for 250.00. Both have the bigger flexplate bolts 7/16 . I also have a b&m flex plate dual pattern I sell for 45.00. I could possibly meet you part way if needed.

Near the I64/I57 interchange?  If so, I go through there visiting family once in a while near St Louis.

[turbochallenger]

I am about 6 miles north of the town but that is it 64/57 intersection.

[SCREAMINGSCAMP2]

I have a 727 that needs to be rebuilt, a cast water pump housing and new unused alum, pump. along with assorted pulleys.  I am in Evansville Ind.

[blasphemous]

I have a 727 that needs to be rebuilt, a cast water pump housing and new unused alum, pump. along with assorted pulleys.  I am in Evansville Ind.

This would be perfect, I should be coming through you're way in no more than 2 months (I go to Missouri, if nothing else sooner, to go hunting in early Nov).  PM me a price and we'll go from there!

[bOb shingler]

I always forget it doesn't show up under our names.  I'm in Louisville, KY... so I'd prefer the heavier stuff be close enough to pick up (a couple hours away or so), but the other stuff can ship.

The trans is too far away, I'm trying to find that a little close to home.  Thanks for the offer though.

    it doesn't