a body big block headers?

[a493demon]

looking too find what people are using. i have a 493 indy 440-1 headed eng. in a demon i wanted pro parts but no one seems  too have them. found out today my cppa headers won't work what a p i t a that was. thanks for any help. brad

[mrpatel]

I have a friend that was able to use B body 1 7/8 TTI headers in a 68 barricuda with a 400 and Eddy heads with minor mods (motor mount shimming). He said they hung a little low and with a RB in an A body it may be worth a shot. Im not familiar with the INDY parts.

[RM440]

Looking to sell your headers ? I might be interested in purchasing.

[bOb shingler]

looking too find what people are using. i have a 493 indy 440-1 headed eng. in a demon i wanted pro parts but no one seems  too have them. found out today my cppa headers won't work what a p i t a that was. thanks for any help. brad

you have to install a rack and pinion and coil overs to get them to work.

[flyboy01]

lso, check out the tech section.

[540Valiant]

Bob mazzolini racing, should still be taking orders for the Pro Parts headers.    They are excellent

[540Valiant]

Mayo Performance is also a good source for Pro Parts headers

[robx4406]

Neither Bob nor Mayo have any proparts headers.

Bob was talking about having someone build a set similar to the proparts with some updates and possible tube size options.  Hadn't heard anything whether the deal was a go or not. Selling price was going up about 50% from the proparts price of about 450-500 to 750-800.

That's the word I got.

[540Valiant]

Bob Mazzolini said if he had enough interest he'd start making them, I've been trying too spread the word. I hope he does, they're very good headers. I was told the same robx4406 between 700 and 800 bucks.

[a493demon]

i traded my new tti's that didn't fit for the pro parts .i had been wating on mazz. but this came up so i made the trade. brad

[540Valiant]

I'm sure you'll like them.    Good luck

[ari440]

other then the tti/cppa  or proparts headers do  any other headers work with indy heads

[68valiant68]

are the proparts headers the old herb mccandles design?  mine have 2 tubes on each side go out the fenderwell 2 inside the chassis and they all meet inside the framerails.  I got mine from hensley performance in kty. 

[Womanator]

It all depaends on your purpose.Fenderwell works well on my race car with a 496 ci indy headed engine,440 with tti street strip car and Schumachers on the duster.You can also go the custom route and I've had them built for around $750.

[bOb shingler]

i traded my new tti's that didn't fit for the pro parts .i had been wating on mazz. but this came up so i made the trade. brad

let's us know how they fit with your combo?

[a493demon]

they fit ok but the pass side center 2 tubes hit the t bar . kind of a crappy header but they work better than any thing else i tried . brad