Pages: [1] 
|
 |
|
 Author
|
Topic: MP Inboard box, Mono, Caltrac mock up pics (Read 581 times)
|
|
Crazy68Dart
|
Here are some pics of my mock up. Nothing revolutionary here, just thought some one out there might have an interest. Seems like it has been a hot topic lately. I am currently just mocking everything up, checking things etc. I grabbed the centerlines of the new bolts of the original mounts. Some of you may have seen my last post about the driver side being a bit off. I elongated the hole and everything squared up really nice. I measure diagonally from the spring perch centering bolts to the torsion bar mounts. Both measurements are dead on. At least within the 1/16" of the tape I was using. So I am pretty pumped right now that things are finally starting to progress. |
|
|
|
|
Logged
|
|
|
|
|
fourspeed
|
That looks like good work. I'm glad things are lining up!
Mark
|
|
|
|
|
Logged
|
|
|
|
|
mopowers
|
Hey thanks for the pics. This is going in my personal tech archive for future reference  |
|
|
|
|
Logged
|
66 Dart GT: BB project. shooting for high 10's 2006 Dakota  |
|
|
|
Crazy68Dart
|
There are more in my gallery if you want to have a look. Thanks guys.
|
|
|
|
|
Logged
|
|
|
|
|
|
bentwheel43
Guest
|
what did you have before and did you get a 60ft. to compear it to. did you make a gain. MAX
|
|
|
|
|
Logged
|
|
|
|
|
Crazy68Dart
|
what did you have before and did you get a 60ft. to compear it to. did you make a gain. MAX
Sorry no. This is the first go around on this car. Its previous state was bone stock with some old 6 leaf springs. I wanted to drop some weight and guys seem to have good luck with this setup. |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 |
