Should i lower my car it sits high?

[cold85]

My car seems to sit high i would like to lower it do all i need to do is turn the torsion bars and if so where would i stop at?
[img][/img]

[attachment deleted by admin]

[Jim_Lusk]

That looks high. Any ride height adjustment requires realignment. I usually try to put about 1" between the LCA bumper and frame.

[Rocky Ak]

are those fenderwell headers?...makes lowering the front a bit more difficult.

[Jamakin]

just take it off the trailer, that sould lower it a good foot and 1/2 

[SIKPUP]

just take it off the trailer, that sould lower it a good foot and 1/2 

Thats what I was gonna say !!!

                            SIKPUP

[cold85]

Everybody is so funny. But no help

[sr71mopar]

I kinda like the look of a high sitting hot rod.

[bOb shingler]

you might try the old optical dillusion trick--- put larger tires on it. 

[DartKnight]

I just went in 1/4 turn increments on the torsion bolt; like Rocky said, I'd take it easy with those headers.

[imfamousjim]

My car seems to sit high i would like to lower it do all i need to do is turn the torsion bars and if so where would i stop at?
[img][/img]

thats what my car comes back like from midas... they've done two of our cars and theyve both sat high as hell. im just gonna go get it aligned at a diff shop.

[sr71mopar]

My car is not done yet, but I also have pro parts headers. I have a funny feeling my car wont be too low.

[bentwheel43]

   I have hookers but I have to set mine low,because if you put it higher with the torson bars it wants to float. They rubb bad but going strate they have about 4"         I race it only!!   BE SAFE,    MAX

[attachment deleted by admin]

[Ciscodog]

Lowering the front is going to make the back look WAY higher.  If you were to lower the back with some lowering blocks the front will settle down a bit.  Then all you'll need is a turn or two on the bars.  It will help your weight transfer too.  That forward rake never helps...