Pages: [1] 
|
 |
|
 Author
|
Topic: 72 pro street Dart with a 500 inch stroker VIDEO OF IT RUNNING NOW! (Read 1413 times)
|
|
|
|
dd69a
|
Nice machine!!!  |
|
|
|
|
Logged
|
|
|
|
|
west
|
looks like some mean green  |
|
|
|
|
Logged
|
360/727/3.73 12.7 on street tires |
|
|
hazzardgarage
Jr. Member
 Offline
Posts: 23
BigBlockDart.Com
|
Thanks guys. I`m puttin "go green" on the plates  !I really am having hood issuses. can`t run a aircleaner because the carb vents actually hit the hood scoop. That is beside the typical turing sharp issues because of the headers and 430 spool in the rear. |
|
|
|
|
Logged
|
|
|
|
|
BigSlim
|
Very Nice!!! Who's headers do you have on it?
|
|
|
|
|
Logged
|
1967 Barracuda 440 fast back
1969 Barracuda 340 Fast back
Great Wife, Kids and many, many blessings!!
|
|
|
hazzardgarage
Jr. Member
Offline
Posts: 23
BigBlockDart.Com
|
The guy I bought the car from made them. In fact they slip apart(the header tubes for access. I`m thinking about a new design for header flanges and exhaust for these cars since they have ground clearance with the collectors as well. I hope people will buy them as it will work on most cars.
|
|
|
|
|
Logged
|
|
|
|
MoparMike
Jr. Member
Offline
Posts: 95
BigBlockDart.Com
|
Great looking car!  |
|
|
|
|
Logged
|
'73 440 Dart Swinger
'89 318 Dak
'99 CTD Ram
'71 383 Satellite Sebring Plus
|
|
|
|
|
hazzardgarage
Jr. Member
Offline
Posts: 23
BigBlockDart.Com
|
Hey,did you make that hood?
|
|
|
|
|
Logged
|
|
|
|
|
Megajoltman
|
Nice car!
What height is the scoop it looks pretty short in the pic?
|
|
|
|
|
Logged
|
building a 69 383 dart
Daily Driver 1998 Ram CTD 12V 4x4 Quad Cab Auto Shortbox, 3in Carli lift with custom rear lift springs (no factory blocks anymore) DSS Steering Stabilizer, 315 Toyo Open Country M/T tires
|
|
|
hazzardgarage
Jr. Member
Offline
Posts: 23
BigBlockDart.Com
|
Nice car!
What height is the scoop it looks pretty short in the pic?
from the front of the scoop to the hood is 3 1/2. The side if the scoop to the hood is 3 inches. I`m thinkin I need at least a 6 inch. |
|
|
|
|
Logged
|
|
|
|
DODGE
Jr. Member
Offline
Posts: 45
BigBlockDart.Com
|
what brakes are on the front
|
|
|
|
|
Logged
|
it takes a mopar to catch a mopar
|
|
|
|
Bigcube
|
Nice! I dealt with carb clearance issues the same way as 69 dart hulk. Too bad it's not an older one, I have an extra hood for sale.
|
|
|
|
|
Logged
|
Jim  Yes it's fast and no you can't drive it! Best 1/8 1.259 60', 5.67@121 Best 1/4 8.94@151 All Motor http://www.bigcube.org/ |
|
|
|
Megajoltman
|
Nice car!
What height is the scoop it looks pretty short in the pic?
Is that a carb spacer on there if so how big? Holy crap I'm going to need a huge hood scoop then I have a one inch spacer on mine with a 5 in tall air cleaner |
|
|
|
|
Logged
|
building a 69 383 dart
Daily Driver 1998 Ram CTD 12V 4x4 Quad Cab Auto Shortbox, 3in Carli lift with custom rear lift springs (no factory blocks anymore) DSS Steering Stabilizer, 315 Toyo Open Country M/T tires
|
|
|
hazzardgarage
Jr. Member
Offline
Posts: 23
BigBlockDart.Com
|
The front brakes are wilwood. The spacer is 2 1/2 inch which picks up 10 horse on the big end. I need a hood real bad. the vents on the top of the carb hit my hood and with no hood is like a tunnel and wind drag.  |
|
|
|
|
Logged
|
|
|
|
|
|
|
needsaresto
|
Sounds cool! What are the engines specs? That looks like a six pack scoop but I cant really tell from the angle of the only pic that has the scoop in it.
|
|
|
|
|
Logged
|
|
|
|
hazzardgarage
Jr. Member
Offline
Posts: 23
BigBlockDart.Com
|
its been back halfed, front halfed with with wilwood rack and pinion steering and wilwood disc brakes. The car has engine plates, a 10 point cage. 2 racing seats with 6 point harnesses, narrowed 9 inch with a expensive center section with a 430 spool,Moser axels, expensive drive shaft, 6-pak lift off hood (has a clearance issue ) line lock, MSD 6-AL, MSD distributor, engine plates, new TCI tranny with a 10 inch converter, reverse manual shift, The engine is a stroked 440 to a 500 inch. The rotating assembly is balanced Eagle crank and rods with J+E flat top pistons, moly rings. The heads are closed chamber that have been ported and polished, 2.14 1.88 race valves and double springs,10 degree caps. Compression is around 11.5 to 1. Cam is 590 mopar performance solid cam. Head lights, park lights, tail lights, license plate light and brake lights work. This car has the best of the best in it. right now it has 30 inch tall tires with 10 inch wide slicks but with a different back spacing it will hold a 13 to 15 inch tire. All 4 corners are adjustable, it has super stock springs but still has brackets for a 4-link |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 |
