Pages: [1] 
|
 |
|
 Author
|
Topic: is it true about redrilling drums? (Read 777 times)
|
4406
Jr. Member
 Offline
Posts: 59
BigBlockDart.Com
|
I just read that if you use redrilled small bolt pattern axels that you have to use the Small bolt pattern drums and redrill the drums also.
Is this true?
|
|
|
|
|
Logged
|
|
|
|
|
fourspeed
|
Yes. You need to redrill those crazy flared drums. They're narrower.
|
|
|
|
|
Logged
|
|
|
|
4406
Jr. Member
Offline
Posts: 59
BigBlockDart.Com
|
screw that!  I'll just buy new axels, I already have the green bearing kit.  |
|
|
|
|
Logged
|
|
|
|
|
qkcuda
|
Make sure you specify axles that are A body width with B body offset for the drums. I redrilled mine, and one thing that I don't like is that there is no support behind the outer ring of the wheel centre. (the bolt holes are in a recess between two stamped rings) I also don't like that the wheel no longer centres on the axle shaft end. I am using stock steel rims and I am thinking about fabricating a 1/4 inch spacer, larger than the diameter of the stamped wheel ring, with a raised ledge on it around the axle shaft end to help centre the wheel also. Probably would have been easier to just order new axles.  |
|
|
|
|
Logged
|
|
|
|
|
fourspeed
|
screw that! I'll just buy new axels, I already have the green bearing kit. That's the better way to go for sure. |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 | 
