Pages: [1] 
|
 |
|
 Author
|
Topic: Question on Bills upper A arms?? (Read 262 times)
|
|
ou812
|
Went to align the front end of the duster, and I cant get enough camber. How far out can I safely run the heim joints? Front is all the way in, and rear is 4 turns from all the way in. Castor was great at 6+ but couldnt get camber to zero. One side was 1.9 and other was 1.0 camber negative. I need to know just how much I can safely push the top arm out with the heim joints. Other than that, what a huge difference with the arms and struts!!
Brian
|
|
|
|
|
Logged
|
|
|
|
|
Bill_Reilly
|
You can have an easy 1/2" of threads out past the jam nut with no worries. Normally, 2 threads out on each end seems to be enough on most cars, but alot can change that.
|
|
|
|
|
Logged
|
Those who say it can't be done, should not interrupt those of us who are doing it.
|
|
|
|
ou812
|
Thanks Bill, your the best!! Why do you think my duster needs to be setup different? Cant say enough about your products Bill, very very nice work!
Brian
|
|
|
|
|
Logged
|
|
|
|
|
Bill_Reilly
|
Over the years, the frame rails can twist inwards from use/abuse - I don't hear about it very often, but it's often enough that I'm not surprised. Thats why I won't make the cheaper arms with welded on bushing ends - the odds are too high that a certain length won't work.
|
|
|
|
|
Logged
|
Those who say it can't be done, should not interrupt those of us who are doing it.
|
|
|
|
ou812
|
Abuse??  Hey Bill...thanks for all the help. I will let you know how well everything works after Pomona May 7th. Brian |
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 |
