Pages: [1] 
|
 |
|
 Author
|
Topic: wiper arm bushing upgrade (Read 1353 times)
|
sweatybetty
Full Member
 Offline
Posts: 368
BigBlockDart.Com
|
well its winter and rainy crappy weather, so im doing all the little bs stuff. heres some pics of the wiper linkage bushing upgrades. these bushings are from a early 70s throughlate 80s mopar. i got these at napa
pic 1 drill out the hole to 35/64" and use a 1/8" file to cut the slot. the slot keeps the bushing from spinning
[attachment deleted by admin]
|
|
|
|
|
Logged
|
now that i have a brighter future, im going to start brushing my teeth
|
|
|
sweatybetty
Full Member
Offline
Posts: 368
BigBlockDart.Com
|
pic 2 press the bushing into the arm and then ream it out with a 3/8" drill bit. it will fit tight over the pivot stud but i used a bit of oil and it fits sweet. snap the retainer clip on and your done
[attachment deleted by admin]
|
|
|
|
|
Logged
|
now that i have a brighter future, im going to start brushing my teeth
|
|
|
sweatybetty
Full Member
Offline
Posts: 368
BigBlockDart.Com
|
heres the finished piece
[attachment deleted by admin]
|
|
|
|
|
Logged
|
now that i have a brighter future, im going to start brushing my teeth
|
|
|
sweatybetty
Full Member
Offline
Posts: 368
BigBlockDart.Com
|
and the part #
[attachment deleted by admin]
|
|
|
|
|
Logged
|
now that i have a brighter future, im going to start brushing my teeth
|
|
|
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 5261
A-bodies since 1978, this one since 1983
|
Very nice.  |
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
GT_convert.
|
Can this get put into a Tech file/page on the site?
|
|
|
|
|
Logged
|
Road Racer
40 years of go-karts, motorcycles, & cars...with a hydro-plane every once and awhile to cool things down!
No such thing as too much HorsePower!!
|
|
|
|
Bakaruda
|
Can this get put into a Tech file/page on the site?
I second this |
|
|
|
|
Logged
|
Cary Snyder 5.7L Hemi Cuda  |
|
|
sweatybetty
Full Member
Offline
Posts: 368
BigBlockDart.Com
|
if anyone needs more detailed pics or whatever let me know. i was trying to upgrade to more modern (available) stuff. the originals were brass. this should work on the later a bodies as well. thanks for all the comps  |
|
|
|
|
Logged
|
now that i have a brighter future, im going to start brushing my teeth
|
|
|
|
Pages: [1] 
|
|
|
 |
