width of spring box??

[mopowers]

Does anyone know what the inside width of the spring box for the front leaf spring mount in the mopar relocation kit is?

[bOb shingler]

try carefully measuring the width of your front spring eye bushing sleeve at the widest part and add 1/16" to 1/8"

[mopowers]

I measured about 3 1/8" on the outside of the spring eye bushing and tube.  But I want to have room for two 3/16" plates for my cal-tracs I'm making plus washers.  I have a 4 footer of 4x4 1/8 wall square steel tube.  I going to cut it length-wise to fit.  I was just curious what the mopar kit's width was.

[jet-taz]

i got these measurements  from the old site width 3.125 lenght 9.00 height 4.300

[rharley5652]

GLAD TO HELP,...GOT A LOT OF HELP FROM GUYS ON THIS SITE ,..AND GETTING READY TO DO MINE NOW,..



  SO THATS 12 7/8'' ACROSS THE TOP,..6 1/2" ACROSS THE BOTTOM,..4 1/8" TALL AN 3 1/2" WIDE ,.. THE STEEL IS ABOUT 1/8" THICK.  o----o<>GOOD LUCK

[rharley5652]

I measured about 3 1/8" on the outside of the spring eye bushing and tube.  But I want to have room for two 3/16" plates for my cal-tracs I'm making plus washers.  I have a 4 footer of 4x4 1/8 wall square steel tube.  I going to cut it length-wise to fit.  I was just curious what the mopar kit's width was.

GO TO WWW.MOPARSTYLES.COM,.. TALK TO BK ,..HE SHOWS HOW THERE DOING CAL-TRACS





__________________