Pages: [1] 
|
 |
|
 Author
|
Topic: 71 Demon alignment specs (Read 544 times)
|
|
demon340v
|
hey guys i'm looking for all the measurements and points that everything should be at. i'm going to get my entire frame aligned up on a jig so i was wondering if you guys had the specs for it?
|
|
|
|
|
Logged
|
Alyways Imitated..Never! Duplicated~ Project El Diablo (71 Demon)  |
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
 Offline
Posts: 4927
A-bodies since 1978, this one since 1983
|
The original specs are sometimes dated. Best results will be with the maximum positive caster with a slight (very slight) negative camber (1/8 degree or so) and about 1/16" toe-in. Play with the caster to compensate for road crowns (a little more on the right)
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
demon340v
|
you don't happen to have like the 1 where it shows the bottom of teh car and gives the tolerences everything should be in?
that's what i'm basically looking for
|
|
|
|
|
Logged
|
Alyways Imitated..Never! Duplicated~ Project El Diablo (71 Demon) |
|
|
Jim_Lusk
Official BS King
Global Moderator
BBD God
Offline
Posts: 4927
A-bodies since 1978, this one since 1983
|
I have shop manuals with factory specs. I don't like the way the factory measure ride height (too hard to check). I measure the distance from the LCA to the frame and like to have about 1" between the LCA bumper and the frame. I can post the factory numbers later.
|
|
|
|
|
Logged
|
7903 posts on old board.
|
|
|
|
demon340v
|
i went ahead and was able to track down a frame chart should be here umm tomorrow maybe it's coming from Texas.
|
|
|
|
|
Logged
|
Alyways Imitated..Never! Duplicated~ Project El Diablo (71 Demon) |
|
|
|
dustertogo
|
I have a 70 Duster and have been looking for frame specs for it for a while with no luck. It use to be a race car and is more that likely twisted some. I would love if you could post your Demon specs or please
e-mail them to me. Thanks very much.
|
|
|
|
|
Logged
|
|
|
|
|
Josh
|
I dunno about frame specs and such. But the factory alignment settings blow with radial tires.if it is a street car Jim hit the nail on the head with his suggestion.
|
|
|
|
|
Logged
|
|
|
|
|
Pages: [1] 
|
|
|
 | 
