Type: Posts; User: Pro Street dart
Too much play in the steering wheel
I am going to check the pre-load on the worm gear first. Am I going to be able to 'clean-up' this amount of play? Or should I look for a new steering box for next winter?
'68 Dodge Dart
Anybody else like the 'Stance' of this '70 or '71 A-Body?
Here are my 3 Dawgs..............
What psi radiator cap to use? I would rather use something conservative.
'68 Dart 440 aftermaket Aluminum rad
I cut a check for $140 for 2 GTS door Emblems on September 23, 2007
Countless calls yielded the same story "I am still trying to find a plater"
I give up...
The results of the waterbased paint is getting very good reviews?
Can I use these on OE '68 GTS seats after I remove the sliding track? In other words will I have the studs in place? Will the holes in the floor board line up w/ the Brackets.
Thanks. Thats the answer I was looking for.
This wouldn't change Toe Settings?
Matt, He lives in Ct. Too far to come and get yours.
Are all A-Body 8 3/4's the same length. say from '68 to '72?
A co-worker's friend is converting a slant six '71 Scamp to a 340 engine & four speed.
He'll need to find a a-body 8¾ housing, a 489, or 742 sure grip carrier, not a 741?
This housing has the...
I got the MSD Superconducter 8.8 universal, Wire looms, wire serperators you can have a tight clean look. My TTi's
68S, A guy at the car show tonight had a '68 Barracuda. His parking light's in the grill stayed ON when he turned on the headlamps.
You should have got them Cermamic Coated inside & out.
Crazy68Dart, I don't use gaskets on the WP or T-Stat housing, just a thin coating of the stuff below. No leaks!
I used MSD Super conductor 8.5mm "universal" set. Cut & Crimped each one. Used some 90° boots, some multi-angle's 1or 2 45° Very time consuming.
OF COURSE I know it is.
A TSA agent groping a crippled old man
I checked the directionals w/ the headlighs on and they work.