Hey fellas, I have an 85 dodge w150 that we dropped a 440 in back in the 90's. i'm trying to find a set of headers that will fit this application, but the only thing that i could come across were the bouchillon performance engineering set, and when i called them, they said that hooker or...

I have a 383 with the Eddlebrock 2086 Performer Top End kit and I have no idea where I should put the timing with this set up. It is in a 4 speed 68 dart if that makes a difference. Hopefully someone can help. I called Eddlebrock but was on hold forever.

If you don’t mind please give me your best guess for what I should set the timing to: I am getting ready to set the timing on my 402 Mopar crate motor (specs are below). I was given the below timing suggestions as a starting point: 18 degrees at idle 16 degrees at 3200 (34 degrees total) 12...

I'm new to this forum and I would like to show you what I have been working on for the last year. I finally got it finished last month!! It is a 440 stroked to 512c.i., took it to a 1/8 mile track at made one pass before it broke the rear end gears (I EXPECTED THAT TO HAPPEN). It ran 6.68 at...

Thanks for the acceptance. I have a 56 Dodge Fargo australian built pickup. Running a Fisher 871 blown 400 on straight Gas with an A833 box and 9". Engine curently out getting a freshen up after 25 years. Plan is to do a 400 crank swap to hit the 451 stoker version - but getting parts over here...