Big Block Dart Forums banner
1 - 20 of 30 Posts
G

·
Discussion Starter · #1 ·
I know there was a tech post on a mopar board somewhere but I can't seem to find it.   I want to know what parts off of what car to get this setup. I have the big bolt pattern brake setup now but want a bigger set up since I need new rotors.  tnku     
 

·
Registered
Joined
·
704 Posts
also there is another difference

i believe that the 76-78 had the pin style where as the 79-81 had the slider style

i choose to go with the slider style because it seems simpler to me, but go with what ever you allready have

also the brackets i got are off a 79 cordoba and the guy said they were the heavy duty ones, i compaired them and they seem to be alittle thicker, but i dont think it makes a diference
 

·
Registered
Joined
·
62 Posts
This is what I'm using on my 71 Scamp:
11-3/4 Cordoba Rotors
Cordoba streering knuckle (spindle)
73 Dart upper control arm
Hughes racing ball joint
Porsche 4-piston Caliper
Custom adapter
Can't see where/how to insert pics??
 
G

·
Discussion Starter · #8 ·
Thanks for the responses!



Scamp said:
This is what I'm using on my 71 Scamp:
11-3/4 Cordoba Rotors
Cordoba streering knuckle (spindle)
73 Dart upper control arm
Hughes racing ball joint
Porsche 4-piston Caliper
Custom adapter
Can't see where/how to insert pics??

How is this working? Porsche caliper? Who makes that bracket? With the picture you need right click on it and get the properties of the picture. Then copy and paste in to the
 

·
Registered
Joined
·
62 Posts
jedrattle said:
Thanks for the responses!



Scamp said:
This is what I'm using on my 71 Scamp:
11-3/4 Cordoba Rotors
Cordoba streering knuckle (spindle)
73 Dart upper control arm
Hughes racing ball joint
Porsche 4-piston Caliper
Custom adapter
Can't see where/how to insert pics??

How is this working? Porsche caliper? Who makes that bracket? With the picture you need right click on it and get the properties of the picture. Then copy and paste in to the thingy.
[/quote]

I designed the caliper adapters and had them machined. The Calipers are 4 piston aluminum from a Boxster 'S' (Brembo).
Slight correction to my configuration ==> The spindles are 73 Dart
Seem to work fine but so far I haven't left the driveway, Lights this weekend!
I also have 2004 Mustang Cobra 11.69" Disc on my 8-3/4 rear. Also my design.
 

·
Registered
Joined
·
157 Posts
I got your pictures later tonight I'll upload them and post them up.

This kit is far more advanced than the Mopar Action budget parts swap.
 

·
Registered
Joined
·
157 Posts
My apologies for taking so long to post your pictures. I forgot about this thread. Here are the pictures.


Rear set-up:

















If this picture doesn't make your mouth water than you are on the wrong forum. I was awe-struck by the hotness of this rear.





 

·
Registered
Joined
·
408 Posts
Scamp said:
Glad to; tell me how to post them or send me an email.
You need to make at least 10 posts before you can post pics. I guess it's to reduce spam. Once it's enabled, click the second button in the second row at top that looks like this:
Hover over the buttons and it gives a description of what it does.
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top