Big Block Dart Forums banner
1 - 1 of 12 Posts

· Registered
59 Posts
One thing you have to consider, is that I believe you use the stock spindles and smaller upper control arms on the Engineered Components set up. If you go to 73 and newer spindles and upper control arms they are bigger. That may not make a diff for you, but something you should consider. I'm doing the conversion right now with the 73 and newer disc update. Callipers and rotors pretty cheap and easy to get. Steve
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.