Big Block Dart Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
Ok I need help. I am trying to change out the ignition switch on my 74 Dart Sport. I have changed may over the years, but I have never worked on one with a key release lock. Does that locking gear come off the shaft?? Or do I disconect the shaft from the box and pull the saft up enough to change the switch. None of my manuals cover that year, so I am stumped. Any help would be greatly appreciated.  tnku tnku tnku
 

·
Registered
Joined
·
117 Posts
Just pulled 2 apart this week, trying to make one good one. Anyways, there's a roll pin holding that star fish looking thing onto the shaft and it can be a pain to get out. There also might be a c-clip or snap ring or 2 you have to pull off first.

If anyone knows where to get a new turn signal switch that doesn't cost $50 and up, let me know.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top