Big Block Dart Forums banner

Interior Paint Questions Need Quick Answer!

2574 Views 8 Replies 4 Participants Last post by  strange246
Ok I'm doing the inside of the Demon Black, what is the correct finish? Gloss? Satin? I thought some parts were gloss and some satin of semi gloss, what gets what? I'm assuming the main part of the dash and doors is gloss ??? Buying paint tomorrow need answer quick! ???
1 - 9 of 9 Posts
Ryan, I think the upper and lower door frames are gloss and the metal portion of the dash is satin (non-reflective). Dash pads and console are satin dyed. My cuda is stock and that's what I have.
qkcuda said:
Ryan, I think the upper and lower door frames are gloss and the metal portion of the dash is satin (non-reflective).  Dash pads and console are satin dyed.   My cuda is stock and that's what I have.
that sounds right to me
Thanks guys! tnku
qkcuda said:
Ryan, I think the upper and lower door frames are gloss and the metal portion of the dash is satin (non-reflective).  Dash pads and console are satin dyed.   My cuda is stock and that's what I have.
The metal part between the pad and windsheild ? What about the face of the dash? Same thing? glove box door etc?
tnku
In my Demon I painted my dash and steering column flat black with rustuleom paint, then used rustoleum gloss on the top and bottoms of the doors (metal) and c-pillars that go around 1/4 glass. It looks identical to factory.
72Dart_400 said:
In my Demon I painted my dash and steering column flat black with rustuleom paint, then used rustoleum gloss on the top and bottoms of the doors (metal) and c-pillars that go around 1/4 glass.  It looks identical to factory.
tnku I'm ended up getting a Dupont epoxy type paint for the inside, a very low gloss (Matte finish) for the dash and column and high gloss for the rest of it...
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top