Big Block Dart Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,490 Posts
Discussion Starter · #1 ·
What pushrod is needed for use with a later model 2-bolt master? I'm looking to replace a single circut master in my 66 and want to know what rod I need. Thanks guys.
 

·
Registered
Joined
·
311 Posts
you can reuse the rod off the single reservoir M/C on the car now, just replace the little rubber retainer on the tip before you install it in the newer style M/C.
 

·
Registered
Joined
·
724 Posts
That's what I used on my 65. The adapter puts the M/C at the right distance to re-use the original rod.
 

·
Registered
Joined
·
1,490 Posts
Discussion Starter · #4 ·
GON_RACIN said:
you can reuse the rod off the single reservoir M/C on the car now, just replace the little rubber retainer on the tip before you install it in the newer style M/C.
Can you get these little retainers at the parts houses?

ski said:
That's what I used on my 65. The adapter puts the M/C at the right distance to re-use the original rod.
How thick is the adapter? I was just thinking about making my own.
 

·
Registered
Joined
·
1,490 Posts
Discussion Starter · #7 ·
sweet! thanks a lot!!
 
1 - 7 of 7 Posts
Top