Big Block Dart Forums banner

moog 7103 offset bushings help

2561 Views 3 Replies 2 Participants Last post by  Bill_Reilly
hi has anyone got a link for these thanx
1 - 4 of 4 Posts
G
Yea, I have them - $60/set of 4. You need to reuse the little metal endcaps from your stock bushings. Quite a pain in the ass, but I guess it's a worthwhile solution for a little cash and aggravation.

When I tested them on some parts here, I gained about 1.5 degrees of caster while holding the same camber number.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top