Big Block Dart Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
Working on the dart today,we wanted to hang the rear springs to get some measurements they are S.S. 002/003 with the mopar relocate kit we have already moved the mounts in, the problem is getting the rear bushings in the springs evenly without destroying them in the process, the bushings fit in the frame fine just need to know the trick to pressing them into the spring. THANKS
 
G

·
Discussion Starter · #3 ·
I have my own reply,I talked to the guys at Mancini in detroit and the reason the the bushings will not fit the rear of the spring is they are the wrong ones! The Mopar relocate kit comes with B body bushings which fit nicely into the frame sleeve but the end of the 002/003 springs take A body bushings which are smaller.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top