Big Block Dart Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
117 Posts
Welcome. We all know the guy that wrote that article, same guy that runs this site, Bill.

Let's see:
T-bars, keep your current lower a-arms and go with whatever t-bar's you want. Thin one's for drag racing, thick for road racing or something in the middle. List your setup, motor, use etc and someone will point you in the right direction.

Sway bars depends on the type, if you go with a factory type, you need the little tabs on the lower a-arms the bar connects to.

The 73 and up unicast brake system will work with the 14" wheels, the big 11.75" brakes you need 15".

Upper a-arms, check out the RMS site up top of this page, it's Bill's.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top