Big Block Dart Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
733 Posts
Discussion Starter · #1 ·
Good place as any to ask a question. I just finished putting power steering in my Dart , all I need is the pulley. Is anyone running power steering in their Dart BB non A/C. I would like to get a part # if possible . 5/8" press on X 5or 6" diameter pulley. Also I have one that the shaft hole measures 11/16 anybody know of this size . its 11/16 x 5 1/4 "
 

·
Registered
Joined
·
22 Posts
Pully part numbers

All Barracuda/Dart except 383 use part number 2951029
383 uses part number 2951128
Those two applications also use different power steering pumps. I know the LA engines used the Saginaw pump 2891122. Oddly enough the slant 6 and the 383 use the same pump part number 3003801.
The Saginaw pumps have a key slotted, nut retained pulley. The Chrysler pumps have a non-slotted pressed on pulley.
Perhaps with these numbers you can get some specifications that are not given in the Mopar catalog.
 
1 - 2 of 2 Posts
Top