Big Block Dart Forums banner

PRessure bleed procedure

1413 Views 1 Reply 1 Participant Last post by  Dartsport
I read that when using a pressure bleeder with a disk front end, you need to hold open the metering valve. On my 75 Dart, the propotioning valve has no visible metering valve - or at least one to hold open. If
1 - 2 of 2 Posts
I have a pressure bleeder here at my shop. You should use 10 psi. in pressure bleeder. I have never had to play around with the button on the proportioning valve. I usually pressure bleed from the farthest to the closest. Then I go over each wheel once or twice , by having an assistent hold down on the brake pedal while I open and close each bleeder.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.