[smitty72]

just got my tubs in the car, making some real progress. Q is what do you guys reccommend to seal the tub to the quater panel. I used a summit 36" tuib kit. man is there some extra room in here now. about 154 inches from what I measured

I'll post some pics on monday

 

[sickt7cuda]

The best thing to do is to fill the space with "seam sealer". 3M makes a good product for this. Don't even tack weld the tubs to the quarters, cause what will happen is the tubs will eventually pull on the quarter panels and you'll end up with stress lines, visible from the outside.