Big Block Dart Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,490 Posts
Discussion Starter · #1 ·
Does anyone know what the inside width of the spring box for the front leaf spring mount in the mopar relocation kit is?
 

·
Registered
Joined
·
1,490 Posts
Discussion Starter · #3 ·
I measured about 3 1/8" on the outside of the spring eye bushing and tube. But I want to have room for two 3/16" plates for my cal-tracs I'm making plus washers. I have a 4 footer of 4x4 1/8 wall square steel tube. I going to cut it length-wise to fit. I was just curious what the mopar kit's width was.
 

·
Registered
Joined
·
283 Posts
i got these measurements from the old site width 3.125 lenght 9.00 height 4.300
 
G

·
GLAD TO HELP,...GOT A LOT OF HELP FROM GUYS ON THIS SITE ,..AND GETTING READY TO DO MINE NOW,..



  SO THATS 12 7/8'' ACROSS THE TOP,..6 1/2" ACROSS THE BOTTOM,..4 1/8" TALL AN 3 1/2" WIDE ,.. THE STEEL IS ABOUT 1/8" THICK.  o----o<>GOOD LUCK
 
G

·
mopowers said:
I measured about 3 1/8" on the outside of the spring eye bushing and tube.  But I want to have room for two 3/16" plates for my cal-tracs I'm making plus washers.  I have a 4 footer of 4x4 1/8 wall square steel tube.  I going to cut it length-wise to fit.  I was just curious what the mopar kit's width was.
GO TO WWW.MOPARSTYLES.COM,.. TALK TO BK ,..HE SHOWS HOW THERE DOING CAL-TRACS





__________________
 
1 - 6 of 6 Posts
Top